"Loading..."
Join the Burmon Revolution
FBC Code Approvals Click here

Load Table

L-bolt (embedded into concrete)

FASTENER SCHEDULE

SP/DF Allowable Load

Corrosion Finish

MASONRY

CONCRETE

MASONRY

CONCRETE

Burmon Stock No.
Ref No.
Steel Gauge
Burmon L-Bolt length
½ inch thickness
Min Qty
Type Burmon Screws
Uplift
160%
Uplift
160%
F1
160%
F2
160%

L-Bolt: HDG

BHBCON

BHBCON

18

15 ¾ inches

Alloy Steel, HDG

10

(5 each side)

BHH

3105

3105

1552

1552

Anchor: G90

  1. Allowable loads have been increased 60% for wind and seismic loads, no further increase shall be permitted.
  2. Allowable loads are based on anchorage to masonry/uncracked concrete.
  3. Minimum specified masonry or concrete compressive strength f'm 1500 psi and f'c is 2500 at 28 days respectively.
  4. Minimum quantity of fasteners to be installed. Product has additional screw holes not needed to meet published allowable load of product.
  5. Screw L-Bolt to threaded washer until bolt sits flush with threaded washer and tighten nut.
  6. To view code report, click here or visit the code evaluation agency's website.

Technical Info & Downloads

Note: DWG, EASM, STEP and EPRT 3d Models may be viewed using free EDrawings Viewer software

Download the EDrawings Viewer

ProductProduct CodeDescriptionDrawing #PDFDWGEASMSTEPEPRTInstallation GuideBrochureInstallation Video
Hurricane Anchor for ICF Concrete Connection to Truss/RafterBHBCONICFBHBCONICF