The Burmon Cyclone Bracket has been especially designed for Australian conditions and modern ICF concrete building techniques to deliver safer, more efficient and higher load rafter/truss anchor connections that deliver significant cost savings over the total house build.
The Burmon Cyclone Bracket has been especially designed for Australian conditions and modern ICF concrete building techniques to deliver safer, more efficient and higher load rafter/truss anchor connections that deliver significant cost savings over the total house build.
The Burmon Cyclone Bracket has been especially designed for Australian conditions and modern ICF concrete building techniques to deliver safer, more efficient and higher load rafter/truss anchor connections that deliver significant cost savings over the total house build.
The Burmon Cyclone Bracket has been especially designed for Australian conditions and modern ICF concrete building techniques to deliver safer, more efficient and higher load rafter/truss anchor connections that deliver significant cost savings over the total house build.
1. Screw bolt and tighten
2. Position in place
3. Screw truss
Note: 400mm-long J-Bolt does not require to be under Rebar to achieve 24 kN of uplift.
Tie Down for Timber TrussesUplift Capacity (kN) | Tie Down for Steel TrussesUplift Capacity (kN) | ||||||
Fixings | JD3 | JD4 | JD5 | Fixings | 0.75mm | 0.95mm | 1.15mm |
Screws Supplied (30mm x 12 gauge hex head) | 4each side of truss | 5each side of truss | 8each side of truss | 12 gauge (30mm screws) | 4each side of truss | 6each side of truss | 6each side of truss |
1 x M12 J-Bolt | 24kN | 24kN | 24kN | 1 x M12 J-Bolt | 21.3kN | 24kN | 24kN |
Note: DWG, EASM, STEP and EPRT 3d Models may be viewed using free EDrawings Viewer software