Join the Burmon Revolution
Australian Code Compliant Certifications State to State Annual Updated Certification

Specification

STEEL

Grade: G300
Thickness: 1.2mm
Galvanised coating: Z275

SCREWS

Burmon red screws
65mm x 10 gauge, Tufcote
Burmon hex head screws
35mm x 12 gauge, Tufcote

BCBS70x35SCREW

BCBS90x35SCREW

Compliance

The Burmon Cyclone Bracket is fully certified and tested for use in accordance with AS1684 Residential Timber Framed Construction.

Notes

  1. The Limit State Design capacities for the Burmon Cyclone Bracket resisting wind uplift are as shown in these tables. Design capacities have been obtained from laboratory testing and procedures given in AS1720.1.

  2. Wind Uplift capacities are baded on AS1720.1:2010 using k1=kt, for use in conjunction with AS/NZS 1170:2002 load code.

  3. The specified Burmon Screw must be used in conjunction with the Burmon Cyclone Bracket to achieve load ratings as per load tables.

  4. Cyclone Bracket (Australian Patent 2013209390) is certified by Registered Structural and Civil Engineers for the Australian Building Industry in accordance with the relevant Australian Standards and Building Codes. Cyclone Bracket is structurally adequate provided it is installed and used in complete accordance with the guide on Burmon brochures and websites.

Load Data

LIMIT STATE DESIGN CAPACITY (kN)

Number of fixings
Timber Joints
JD5
JD4
JD3

8

6.6

9.4

13.0

12

9.9

14.1

19.5

Fixing Guide

Number of screws
Position

8

4 screws into top plate
2 screws each side of the Truss

12

6 screws into top plate
3 screws each side of the Truss

ALSO AVAILABLE

Use Burmon Cyclone Bracket Extreme for even higher load rating.

This Engineered Building Product complies with the AS/NZS 1170 Loading Code

Technical Info & Downloads

Note: DWG, EASM, STEP and EPRT 3d Models may be viewed using free EDrawings Viewer software

Download the EDrawings Viewer

Product Product Code Description Drawing # PDF DWG EASM STEP EPRT Installation Guide Brochure Installation Video
Burmon Cyclone Bracket 90mm long x 35mm wideBCBS90x35 SCREWSingle1
Burmon Cyclone Bracket 70mm long x 35mm wideBCBS70x35 SCREWSingle2
Burmon Cyclone BracketBurmon Bracket to Top Plate Connection
Burmon Cyclone BracketSingle Truss to Burmon Bracket Connection
Burmon Cyclone BracketDouble Girder Truss to Top Plate Connection
Burmon Cyclone BracketMoving Trusses on the Top Plate
Burmon Cyclone BracketLintel Connection
Burmon Cyclone BracketHip Connection
Burmon Cyclone BracketCeiling Joist Connection