"Loading..."
Join the Burmon Revolution
Australian Code Compliant Certifications State to State Annual Updated Certification

Features

  • Designed for roof truss to wall frame tie down
  • Easy to install
  • Code Compliant in each state of Australia
  • No skew nailing required
  • No coil guns required
  • Australian made and owned
  • Patented technology in Australia, New Zealand, USA & Canada
Burmon Brackets for Roof Truss Tie Downs - product main AU
Problems we solve
Burmon Brackets for Roof Truss Tie Downs - product main AU

Back

Features

  • Designed for roof truss to wall frame tie down
  • Easy to install
  • Code Compliant in each state of Australia
  • No skew nailing required
  • No coil guns required
  • Australian made and owned
  • Patented technology in Australia, New Zealand, USA & Canada
Burmon Brackets for Roof Truss Tie Downs - product main AU
Problems we solve
Burmon Brackets for Roof Truss Tie Downs - product main AU

Back

Features

  • Designed for roof truss to wall frame tie down
  • Easy to install
  • Code Compliant in each state of Australia
  • No skew nailing required
  • No coil guns required
  • Australian made and owned
  • Patented technology in Australia, New Zealand, USA & Canada

Features

  • Designed for roof truss to wall frame tie down
  • Easy to install
  • Code Compliant in each state of Australia
  • No skew nailing required
  • No coil guns required
  • Australian made and owned
  • Patented technology in Australia, New Zealand, USA & Canada
Burmon Brackets for Roof Truss Tie Downs - product main AU

Features

Specification

STEEL

Grade: G300
Thickness: 1.2mm
Burmon Screw - Burmon Building Products Galvanised coating: Z275

SCREWS

Burmon red screws
65mm x 10 gauge, Tufcote
Burmon hex head screws
35mm x 12 gauge, Tufcote

BCBS70x35SCREW

BCBS90x35SCREW

Compliance

The Burmon Cyclone Bracket is fully certified and tested for use in accordance with AS1684 Residential Timber Framed Construction.

Notes

  1. The Limit State Design capacities for the Burmon Cyclone Bracket resisting wind uplift are as shown in these tables. Design capacities have been obtained from laboratory testing and procedures given in AS1720.1.

  2. Wind Uplift capacities are baded on AS1720.1:2010 using k1=kt, for use in conjunction with AS/NZS 1170:2002 load code.

  3. The specified Burmon Screw must be used in conjunction with the Burmon Cyclone Bracket to achieve load ratings as per load tables.

  4. Cyclone Bracket (Australian Patent 2013209390) is certified by Registered Structural and Civil Engineers for the Australian Building Industry in accordance with the relevant Australian Standards and Building Codes. Cyclone Bracket is structurally adequate provided it is installed and used in complete accordance with the guide on Burmon brochures and websites.

Load Data

LIMIT STATE DESIGN CAPACITY (kN)

Number of fixings
Timber Joints
JD5
JD4
JD3

8

6.6

9.4

13.0

12

9.9

14.1

19.5

Fixing Guide

Number of screws
Position

8

4 screws into top plate
2 screws each side of the Truss

12

6 screws into top plate
3 screws each side of the Truss

ALSO AVAILABLE

Use Burmon Cyclone Bracket Extreme for even higher load rating.

This Engineered Building Product complies with the AS/NZS 1170 Loading Code

Technical Info & Downloads

Note: DWG, EASM, STEP and EPRT 3d Models may be viewed using free EDrawings Viewer software

Download the EDrawings Viewer

Burmon Brackets for Roof Truss Tie Downs - product main AU

Technical IDs are not correctly set - check input