"Loading..."

Join the Burmon Revolution

Australian Code Compliant Certifications State to State Annual Updated Certification

Features

Complies with AS/NZS Loading Codes
Burmon Bracket locks into position at set out point
No timber/steel crush on block work
Rebar held in place, ready for concrete pour
No moisture transfer from block work to truss
No drilling through nail plate
Bracket provides a clean, level surface
Truss screww fixed for stronger, faster connection
24 kN and 42 kN Uplift Capacity options

Back

Features

Complies with AS/NZS Loading Codes
Burmon Bracket locks into position at set out point
No timber/steel crush on block work
Rebar held in place, ready for concrete pour
No moisture transfer from block work to truss
No drilling through nail plate
Bracket provides a clean, level surface
Truss screww fixed for stronger, faster connection
24 kN and 42 kN Uplift Capacity options

Back

Burmon Brackets for Concrete Masonry Tie Downs - product main AU

Features

Complies with AS/NZS Loading Codes
Burmon Bracket locks into position at set out point
No timber/steel crush on block work
Rebar held in place, ready for concrete pour
No moisture transfer from block work to truss
No drilling through nail plate
Bracket provides a clean, level surface
Truss screww fixed for stronger, faster connection
24 kN and 42 kN Uplift Capacity options

Standard Installation

1. Screw bolt and tighten Screw J-Bolt and Tighten - Burmon Building Products

Screw J-Bolt and tighten nut to BHBCON prior to concrete pour.

2. Position in place Screw J-Bolt Position In Place- Burmon Building Products

Position BHBCON at truss set out point prior to concrete pour

3. Screw truss Screw Truss - Burmon Building Products

Screw fix truss to BHBCON with screws supplied after concrete pour

Note: 400mm-long J-Bolt does not require to be under Rebar to achieve 24 kN of uplift.

Lintel Installation

Shorten J-Bolt Lintel Installation - Burmon Building Products

1. Shorten J-Bolt to depth of Lintel

2. Hook the rebar inside the J-Bolt in Bondbeam

Tie Down for Timber Trusses

Uplift Capacity (kN)

Tie Down for Steel Trusses

Uplift Capacity (kN)

Fixings

JD3

JD4

JD5

Fixings

0.75mm

0.95mm

1.15mm

Screws Supplied

(30mm x 12 gauge hex head)

4

each side of truss

5

each side of truss

8

each side of truss

12 gauge

(30mm screws)

4

each side of truss

6

each side of truss

6

each side of truss

1 x M12 J-Bolt

24

1 x M12 J-Bolt

21.3

24

Technical Info & Downloads

Note: DWG, EASM, STEP and EPRT 3d Models may be viewed using free EDrawings Viewer software

Download the EDrawings Viewer

Burmon Brackets for Concrete Masonry Tie Downs - product main AU

Technical IDs are not correctly set - check input